Model no: EGHB01M

eGlu HUB acts as a communication gateway between all the eGlu devices installed at
home and your Wi-Fi router. It is a pluggable device and draws power from the AC wall
outlet. A push button provided on the HUB can be used to re-configure the HUB if the
Wi-Fi settings of your router are changed.

Model no: EGSP01R

Smart Plug 6A converts existing wall socket into a remote controlled switch. Any appliance
which takes a maximum load current of 6A can be used with this plug. Examples:
Lamps, Table Fans, Coffee Maker, Decorative Lights. The plug also has a push button
which can be used for local on/off control.

Model no: EGSP02R

Smart Plug 16A can we used to remotely control or automate high power appliances like
geysers, air conditioners and motor pumps. The plug also has a push button which can
be used for local on/off control.

Model no: EGMS01N

Motion Sensor detects movement of people. It can be used to alert an intrusion or for
detection of unoccupancy in a room. Motion Sensor is powered by batteries and can be
conveniently placed on any flat surface or hung on a wall.

Model no: EGPA01N

Panic Alarm produces loud sound when turned on. It can be activated based on various
events like intrusion, opening of a door or pressing of the panic button on the TAG. Panic
Alarm is powered by batteries and can be conveniently placed on any flat surface or
hung on a wall.

Model no: EGDSO1N

Door Sensor helps in monitoring the opening and closing of the doors and windows. It
also provides the real time state of the door/window on which it is installed. Apart from
sensing door, it can also be used as a presence sensor or a remote button.

Model no: EGIW03R

In-wall 16A Switch Module can be used to remotely control or automate high power
appliances like geysers, air conditioners and motor pumps with maximum load up to
16A. It is installed behind the existing switch plate and works in parallel with the mechanical
switch.

Model no: EGIW04R

In-wall Triple Switch Module allows automation of regular lights, power sockets and
fans. IWS-3S comes with three switches of 6A rating. It is installed behind the existing
switch plate and works in parallel with the mechanical switches.

Model no: EGIW05R

In-wall Triple Dimmer Module allows automation of dimmable lights and set lighting
intensity. IWS-3D comes with three dimmers of 0.5A rating each. It is installed behind
the wall switch plate and works in parallel with the mechanical switches. Each dimmer
can also be used as an ON/OFF switch as long as the connected load is less than 0.5A.

EGCCO1N

Curtain Controller lets you control your motorized window curtains as well as motorized
main gates. It supports all the motors which use AC phase switching for open and close
operations. Curtain Controller can support up to 6A of AC motor load. It also has an
option to connect physical bell switches for local control.

Model no: EGGCO2R

Triple Relay Controller is a general purpose automation device. It contains three relays
with voltage rating of 220V and current rating of 3A each. The relays can take both AC
and DC inputs for the given ratings.

EGYCO2R

Yale Lock Controller is designed to remotely operate your Yale locks which are compatible
with the K-type or N-type Yale receiver/transceiver modules. The Yale receiver
module is installed in the lock and the Yale transmitter module is interfaced with the
YLC, which also provides power to the transmitter module.

EGLCO1R

RGB LED Controller can control the colours and brightness of the connected RGB LED
strip. RLC requires an external 12V DC power supply and the RGB LED strip.

EGRCO1R

Dual Relay Controller is a general purpose automation device. It contains two relays with
voltage rating of 220V and current rating of 6A. The relays can take both AC and DC
inputs for the given ratings. Dual Relay Controller also has the option to connect physical
AC switches for the local control of the relays.

EGRCO2R

Triple Relay Controller is a general purpose automation device. It contains three relays
with voltage rating of 220V and current rating of 3A each. The relays can take both AC
and DC inputs for the given ratings.

EGSMO1R

Sensor Monitor can convert a wired sensor like smoke detector, gas leak detector etc.
into a wireless sensor. The wired sensor must have ‘NO/NC’ trigger output which should
be connected to the Sensor Monitor. SMHV also provides a 12V/100mA DC output which
can be used to power the wired sensor.

Model no: EGSMO2N

Sensor Monitor is designed to convert an existing low power sensor like Motion Glass
Break Sensor etc. into a wireless sensor. The only requirement is that the wired sensor
should have an ‘NO/NC’ trigger. SMLV can be powered from the same DC source which
is powering the sensor, mostly a battery. SMLV can monitor three ‘NO/NC’ Inputs. ‘NO’
connection is recommended as it increases the battery life.